Gas Engineer Services Across EssexGas Safe Registered, Every AppliancePriced Before a Spanner Is Lifted
From a gas leak reported at midnight to a routine cooker connection, gas work is not a job for guesswork or an unregistered mate. FHP Heating is Gas Safe registered under number 6075146, tests and certifies the work properly, and agrees one fixed price before starting.
Gas Safe Register No. 6075146 · 22 years in the trade · phone answered 24/7 on gas emergencies.
6075146
Gas Safe Register number
22 years
In the heating and plumbing trade
24/7
Phone answered, seven days a week
£2 million
Public liability insurance
12 months
Workmanship guarantee on every job
Gas Safe registered work on any appliance connected to the mains
Gas engineer work covers anything connected to a domestic or commercial gas supply — boilers, cookers, hobs, fires, water heaters, meters and the pipework that feeds them. By law, only a Gas Safe registered engineer can legally carry out, inspect or certify this work, and FHP Heating covers the full range of it across Corringham and the surrounding Essex towns.
What the work actually involves
Depending on the job, that means tracing and fixing a smell of gas, running new pipework to a cooker or fire, disconnecting an appliance safely before a kitchen refit, carrying out an annual gas safety check, or testing an entire installation for soundness after a suspected leak. Every job ends with the appropriate test — tightness testing, gas rate, combustion analysis — and paperwork you can keep or hand to a landlord, letting agent or building control.
Who it is for
Homeowners with a gas hob, fire or water heater that needs connecting, moving or servicing; landlords who need an annual Landlord Gas Safety Certificate; anyone who smells gas or suspects a leak; and commercial premises with kitchens, catering equipment or plant that run on mains gas and need a registered engineer for installation, maintenance or breakdown work.
When it is needed
Immediately if you can smell gas, hear hissing near a meter or pipe, or have a carbon monoxide alarm sounding. Routinely for annual servicing of gas appliances and yearly landlord certification. Ahead of time when a kitchen is being refitted and a cooker point needs moving, when converting to gas from oil or electric, or when a new supply or pipe run is needed for an extension or outbuilding.
Why Gas Safe registration matters here
Gas work is legally restricted and notifiable for good reason — mistakes in pipe sizing, jointing or ventilation are how carbon monoxide poisoning and explosions happen. FHP Heating engineers work under Gas Safe registration 6075146, hold G3 unvented cylinder and Water Regulations qualifications for related work, and carry £2 million public liability insurance on every job undertaken.
Gas faults do not wait for a convenient time to get worse
A gas problem rarely announces itself clearly. It is a faint smell you talk yourself out of, a pilot light that keeps going out, or a cooker connection someone fitted years ago with no test ever carried out. None of that gets safer by being left.
Carbon monoxide from poor combustion
A gas fire, boiler or water heater burning incorrectly produces carbon monoxide — colourless, odourless and dangerous well before it is noticeable. Sooting around an appliance, a lazy yellow flame instead of crisp blue, or a persistent headache in one room are all warning signs that need a Gas Safe engineer, not a wait-and-see approach.
A leak that gets worse with time
Corroded pipework, a loose joint or a damaged flexible connector rarely improves on its own. What starts as a faint smell near a cooker can become a build-up in a confined space. Any smell of gas should be treated as urgent — ventilate, turn off the supply at the meter if it is safe to do so, and call a Gas Safe engineer straight away.
Unregistered work invalidating insurance
If gas work in your home was carried out by someone not on the Gas Safe Register, your home insurance can be affected and any resulting damage or injury may not be covered. It also means there is no certification trail if something is later questioned.
Landlords risking prosecution
Landlords are legally required to have gas appliances checked annually by a registered engineer and to hold a valid Landlord Gas Safety Certificate for every rented property. Missing or lapsed certification is a criminal offence, not just a paperwork gap, and it is one of the first things a tenancy dispute or inspection will surface.
A meter or supply that cannot cope
Adding a new appliance, a second boiler or a run to an outbuilding without checking the meter and pipe sizing can starve every appliance on the system of gas, causing lockouts, poor performance and, in the worst cases, unsafe combustion.
Small faults becoming bigger repairs
A gas fire that keeps cutting out, a cooker that will not stay lit, or a water heater with an intermittent fault are all symptoms an engineer can usually resolve quickly when caught early. Left running intermittently for months, the same fault often takes out a control valve or burner assembly that could have been avoided.
Mistakes that make the bill bigger
- Ignoring a faint gas smell because it comes and goes, rather than treating every occurrence as urgent.
- Letting a builder or unregistered handyman connect a cooker or hob because it is 'only a quick job'.
- Assuming a carbon monoxide alarm going off occasionally is a faulty alarm rather than checking the appliance.
- Landlords renewing a gas safety certificate late, or not at all, and only finding out at a tenancy dispute.
- Adding appliances to an existing gas supply without checking the meter and pipework can carry the extra load.
- Disconnecting a gas appliance yourself during a kitchen or bathroom refit instead of getting it capped off safely.
Five stages from call to certified, tested work
Whether it is a suspected leak or a scheduled cooker connection, the approach is the same: establish the risk, do the work properly, and prove it is safe before leaving.
-
STEP 01
Call and initial assessment
Call 07534 068551, answered 24 hours a day. For a suspected leak we will talk you through immediate safety steps — ventilation, isolating the supply — while an engineer is arranged to attend.
-
STEP 02
Inspection on site
The engineer inspects the appliance, pipework, meter or installation in question, identifies the fault or scope of work required, and explains what needs doing in plain terms.
-
STEP 03
Fixed price agreed
Beyond the call-out and first-hour assessment fee, one fixed price is agreed with you before any further work starts. Prices may vary by location, but there are no surprises added afterwards.
-
STEP 04
Work carried out and tested
Repairs, connections, servicing or new pipework are completed to Gas Safe standards, then proven safe with the relevant test — tightness testing, gas rate check or combustion analysis, depending on the job.
-
STEP 05
Certification and handover
You receive the appropriate paperwork — a gas safety record, Landlord Gas Safety Certificate, or job report — plus our 12-month workmanship guarantee on the work carried out.
What a registered gas engineer gives you that an unregistered fitter cannot
The value of using a Gas Safe registered engineer is not a certificate on a wall — it is a legal, tested, insured outcome you can rely on and prove if you ever need to.
Work that is legally valid
Only Gas Safe registered engineers can lawfully carry out gas work, so every job we complete is compliant from the outset, with no retrospective inspection needed.
Tested, not just fitted
Every job is proven safe with the correct test before we leave — tightness testing on pipework, gas rate and combustion checks on appliances — not simply connected and assumed fine.
Certification you can produce on demand
Landlord Gas Safety Certificates, gas safety records and job reports are issued for every relevant job, ready for tenants, letting agents, mortgage checks or insurance queries.
One fixed price
Beyond the call-out and assessment fee, the price you agree before work starts is the price on the invoice, whether the job is a cooker connection or a full pipe run.
£2 million public liability cover
Every job, domestic or commercial, is carried out under £2 million public liability insurance, and backed by a 12-month workmanship guarantee.
One engineer for gas, heating and hot water
The same registered engineer who fixes a gas leak can also service the boiler, fit the cylinder or take on the landlord certificate, so you are not juggling separate trades for connected work.
The range of gas work we cover, and what changes between jobs
Gas engineer work spans routine servicing and genuine emergencies, domestic kitchens and commercial plant rooms. What is right for a cooker connection is a different job entirely from a full gas soundness test after a suspected leak.
Appliances we work on
Any gas appliance in a domestic or commercial property falls under Gas Safe registered work: boilers, gas fires, gas cookers and hobs, gas water heaters, and commercial catering equipment. Each has its own servicing intervals, common faults and testing requirements, and connecting or disconnecting any of them without registration is illegal.
Cooker and hob connections are among the most common day-to-day jobs, particularly around kitchen refits, and they still require the same tightness test and visual inspection as any other gas connection, however simple the job looks.
- Gas cookers and hobs — connection, disconnection and servicing
- Gas fires — installation, servicing and fault-finding
- Gas water heaters
- Commercial catering gas equipment
- Gas boilers (see our dedicated boiler pages for full detail)
Leaks, soundness testing and carbon monoxide
A suspected gas leak is treated as urgent. The engineer isolates the affected section, carries out a tightness test on the pipework and installation, and traces the fault using proper leak detection rather than guesswork, before repairing the pipe, joint or fitting responsible.
Carbon monoxide concerns are dealt with the same way: inspecting the appliance, flue and ventilation, checking combustion with the correct analyser, and confirming the appliance is either safe to use or needs to be isolated until repaired. If an appliance is found dangerous, it is labelled and disconnected on the spot, in line with Gas Safe procedures, and you are told exactly why.
- Tightness testing on pipework and installations
- Leak tracing and repair
- Combustion analysis and flue inspection
- Immediate isolation of dangerous appliances
Pipework, meters and new gas supplies
New pipe runs — for an extension, an outbuilding, a new cooker point, or converting a room's heating source — are sized correctly for the appliance being fed and the length and route of the run, then pressure tested before being connected to any appliance.
Where a meter or existing supply cannot support additional load, we advise on upgrading the supply pipework rather than leaving every appliance on the system running under-fed, which is often the underlying cause of intermittent lockouts across a whole property.
- New pipe runs for cookers, fires and outbuildings
- Supply upgrades where load has increased
- Meter and installation pipework checks
- Capping off redundant gas points safely
Servicing, safety checks and landlord compliance
An annual gas safety check on domestic appliances catches deterioration before it becomes a fault — a service is not just a formality, it is when corrosion, poor seals and drifting combustion get spotted early.
Landlords are legally required to hold a current Landlord Gas Safety Certificate (CP12) for every rented property, renewed annually and covering every gas appliance on the premises. We carry these out alongside routine servicing, and commercial premises have their own inspection and maintenance schedules for catering and plant equipment, all covered under the same registration.
Gas Engineer / Gas Safe Services questions,
answered straight
Anything not covered here, ring Dean Sone on 07534 068551. The phone is answered 24 hours a day.
How much does it cost to call out a gas engineer in Essex?
There is a call-out and first-hour assessment fee, after which we agree one fixed price for the work needed before anything further is done. Prices can vary by location, but you will never be presented with a surprise figure once work has started.
How quickly can a gas engineer attend?
The phone is answered 24 hours a day, seven days a week, including for suspected leaks and carbon monoxide concerns, which are treated as urgent. Call 07534 068551 and we will talk you through immediate safety steps while an engineer is arranged.
What should I do if I smell gas?
Do not use switches, naked flames or your phone in the property. Open windows and doors for ventilation, turn off the gas supply at the meter if you can do so safely, leave the property if the smell is strong, and call us or the National Gas Emergency Service on 0800 111 999.
Is FHP Heating Gas Safe registered?
Yes, under Gas Safe Register number 6075146. You can check any engineer's registration and the work they are qualified to carry out on the Gas Safe Register website before they start work.
Do I need a Landlord Gas Safety Certificate every year?
Yes, it is a legal requirement for every rented property with a gas supply or appliance, renewed annually by a Gas Safe registered engineer. We carry these out across Essex and can align the visit with a boiler service to reduce disruption to tenants.
Can you connect a new gas cooker or hob?
Yes. Cooker and hob connections are tested for tightness and inspected as part of the job, whether it is a straightforward swap or a new point being run during a kitchen refit.
What is a gas soundness test and when do I need one?
It is a pressure test on the gas pipework and installation to confirm there are no leaks. We carry it out after any suspected leak, before reconnecting an installation that has been off, and as part of new pipework or appliance installation.
How long does a gas safety check take?
A single-appliance domestic check is usually completed within an hour. A full landlord certificate covering several appliances in a property typically takes a little longer, and we tell you the expected time when the visit is booked.
What guarantee comes with gas work?
Every job carries our 12-month workmanship guarantee, and all work is carried out under £2 million public liability insurance and Gas Safe registration 6075146.
Which areas of Essex do you cover for gas engineer work?
FHP Heating is based in Corringham and covers Brentwood, Billericay, Chelmsford, Rayleigh, Benfleet, Leigh-on-Sea, Hadleigh, Basildon and the surrounding towns for both domestic and commercial gas work.
Gas Engineer / Gas Safe Services across Essex
FHP Heating is based at 116 Lampits Hill, Corringham, and covers the surrounding Essex towns daily.
Related services
Most jobs touch more than one part of the system. These are the services customers most often book alongside gas engineer / gas safe services.
Get a Gas Safe registered engineer out to your property
Whether it is a suspected leak, a cooker connection, a landlord certificate due, or an appliance that keeps cutting out, call 07534 068551 — answered 24 hours a day. Dean and the team will assess the job and agree one fixed price before starting.
- Gas Safe Register No. 6075146
- £2 million public liability
- 12-month workmanship guarantee